Skip to content
Tallahassee Fence Builders Serving Tallahassee & nearby (850) 900-8072

Fence Gates in Tallahassee, FL

Every fence has a weak point, and it's usually the gate. It swings hundreds of times a year, hangs all its weight from one post and takes the worst of the wind. Around Tallahassee we hang new walk gates, two-leaf drive gates sized for a trailer or riding mower, and driveway gates for bigger lots, and we fix the ones already there.

Scraping the ground or refusing to latch? That's almost always fixable without tearing into the rest of the fence.

Free gates quote

Takes about 30 seconds. Prefer to talk? (850) 900-8072

No obligation. See our privacy policy.

Why Tallahassee gates sag

Sag usually starts at the hinge post. In clay that softens after heavy rain, a post carrying a wood gate tips slowly toward the opening until the latch stops lining up. Fixes start at that post: set it deeper in a bigger concrete footing or swap it for steel, then add a diagonal brace that pushes up from the lower hinge corner toward the latch.

Width is the other culprit. A single wood leaf past about 4 feet wide puts a heavy load on its hinges, so mower and trailer openings usually work better as a pair of leaves with a drop rod. Already had a wide wood gate droop? A steel frame skinned with pickets that match the fence holds its shape far better.

Double wood drive gate on a steel frame in a privacy fence beside a driveway, moss-draped live oaks behind it

Gates we build

Walk gates

Three or four feet wide, matched to whatever fence you have, from pine to aluminum, with spring hinges for households with pets.

Double drive gates

Two leaves and a drop rod across 8 to 12 feet, wide enough for a truck, trailer or riding mower.

Steel-frame wood gates

A welded frame faced with pickets to match the fence, built to stay square.

Driveway gates

Metal swing or slide gates for longer drives, ready for an opener now or later.

Gate pricing factors

Fence Gates questions

My gate drags on the ground. Is that fixable?

Almost always. Depending on the cause, that means straightening or replacing the hinge post, bracing the frame or installing an anti-sag cable, and it usually costs far less than a new gate.

What gate width do I need to get a boat or trailer through?

Plan on 10 to 12 feet for most trailers and boats, measured at the widest point with room to steer. For a riding mower, 5 to 6 feet is typical. Wide openings usually work best as a double gate.

More fence services

Areas we serve

Fence Gates in Tallahassee: get your free quote

Describe what your gate is doing, or what opening you need closed, and we'll set up a free visit anywhere in the Tallahassee area.

Call (850) 900-8072 Free Quote